subject
Engineering, 26.01.2021 01:10 kira96

5 VHDL Implementation of a 2-to-1 MUX A multplater is a circuit that selects between several inputs and forwards it to a single culput. In general, a 2"-L-I MUX
has 2 Inputs with n selectars. A schematic diagram ala 2-to-I muliplexer is given below.
Men University
ECSI 22 - Digital Logic (Winter 2021)
VIDL Project
According to the above schematic, the 3-10-I multiplever outputs the input signal A wten the selector signal is equal to
O otherwise Gutputs the input signal B. In this cah, you will implement this 2-10-1 multiplexer in VIDL using structural
and behavioral styles. In the structural modeling of the 2-ID-I muluplecer in VHDL the multiplexer la implemented
using AND, OR OF NOT ples only. More specifically, the structural description of the malüplexer literally realizes its
boolean funcdon. Describe the boolean function in VIDL using AND, OR O NOT gates only. Use the folosing entity
declaration for your VIDL. description of the 2-10-1 muldplexer
library TEEB
TERE STD LOGICIES. ALL
DE TEXE. NUMERIC STD. ALL
way Lal 15
For (A
slogie
10 atd.
3
118 d lose
aut std legie)
EUX TEL 2
Once completed, you will describe the architecture of the 2-to-laulupler using behavioral style. In the behavioral
description, you desroribe de behavior of your target circuit and the synthesis tool arvates a gate-led Layout of your de-
sign. Use a single VIIDL, seled assignment only and the entity declaration below to implement a behavioral descripcion
of the 2-to-1 malaplexer (ree the previous VIIDL assignment for more details).
rary TERRA
we TEREXID LOGICIEL ALI
STRELICTO ALL
y NUX, Avioral
Part (
stdlogies
1 dls 1
*4 loge
0 1
wi_beiral
Once described both behavioral and structural styles of the 2-0-1 multiplier in VIDL you are required to test your
circuits Write a testbench code and perform an exhaustive for your VIDL descriptions of the 2-to-) men
6 VHDL Implementation of a 4-bit circular barrel shifter
la tua part of the Labyou design croun that implements a 4-bis circular batenes. The circular baresh
is a cheat that was shin its lapaat by given manber of this with combinational Loghe. The bill centar bare har
Is y tmplemented by adding the layers of Dal muldpleen as shown below. An & multiples be the lefimos
Dayak ( as the sector igual. Sy 4 muhoplasts the nightmost by bel (0) as the sector
signal. Make sure al you are yound with bothe barrel shine bodo by calculating is output for ser
Inpak combinations by hand


5 VHDL Implementation of a 2-to-1 MUX

A multplater is a circuit that selects between several inpu

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
You know the right answer?
5 VHDL Implementation of a 2-to-1 MUX A multplater is a circuit that selects between several inputs...
Questions
question
Social Studies, 22.10.2019 21:00
Questions on the website: 13722361