subject
Engineering, 25.01.2021 20:30 Abrow484

Classify the following soils according to the USCS. 1. This material has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. The liquid limit (not dried) is 37% while it is 26% when oven dried. The plastic index (not dried) is 6.
2. A soil with some organic odor was observed to change color to dark brown when wet. Additional examination of the soil resulted in LL (not dried) = 32, LL (oven dried) = 21, and PI (not dried) = 10. The soil showed weak reaction with HCL.
3. A soil characterized by the following description: "78 % fine to coarse, hard, subrounded to subangular gravel; 16 % silty (estimated fines); moist, brown; no reaction with HCL; original field sample had 7 % hard, subrounded cobbles and 2 % hard, subrounded boulders with a maximum dimension of 18 in.
4. A sample of well-graded gravel with sand has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand, and 2% fines. The maximum size of the particles is 75 mm. The coefficient of curvature is 2.7, while the uniformity coefficient is 12.4.
5. This sand has 61% predominately-fine sand, 23% silty fines, and 16% fine subrounded gravel size. The maximum size is 20 mm. The liquid limit is 33% and the plastic limit is 27%.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
question
Engineering, 04.07.2019 19:20
List 3 options on how to reduce knocking problens during engine process,
Answers: 2
You know the right answer?
Classify the following soils according to the USCS. 1. This material has 74% fine to coarse sub-ang...
Questions
question
Biology, 23.04.2020 02:45
Questions on the website: 13722367