Engineering, 21.01.2021 23:00 ionmjnm9701
g A bearing used to reduce friction in a machine is 3.281 cm in diameter and 3 cm long. It is lubricated with hydraulic fluid at 360 K where the viscosity of the lubricating fluid is 0.02 Pa. s. If a shaft that is 3.275 cm diameter and rotating at 1800 rpm is centrally placed in the bearing, how much heat (W) would need to be removed to maintain the bearing temperature constant
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
g A bearing used to reduce friction in a machine is 3.281 cm in diameter and 3 cm long. It is lubric...
Questions
Mathematics, 31.03.2021 17:50
Social Studies, 31.03.2021 17:50
Law, 31.03.2021 17:50
Mathematics, 31.03.2021 17:50
Mathematics, 31.03.2021 17:50
Mathematics, 31.03.2021 17:50
Physics, 31.03.2021 17:50
History, 31.03.2021 17:50
