Engineering, 20.01.2021 18:00 rlafferty5604

1. For the following products; what are the appropriate material selection criteria? What type of criteria should be considered? Why? Compare them with your own
words.
What are the alternative materials? Describe the selected materials (Such as; 1040
plain carbon steel and Al 5083) in detail including properties, advantages and
disadvantages, application areas etc. Compare them with your own words.
Select the suitable material and list the alternative materials from the best to the
worst according to the criteria you have set. Discuss the results using your own
words.
a) Suitable material for armor protection. Choose the material considering with
and without the density?
b) Automobile exhaust system
c) Wind turbine blade
2. What type of manufacturing processes can be used to produce the abovementioned parts using selected materials? Select a suitable manufacturing
technique between alternatives. Discuss the selection criteria and the results using
your own words.
3. What is the relationship between material selection and design? Explain in
detail using your own words.
4. What is the relationship between material selection and manufacturing? Explain
in detail using your own words.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?

Answers: 3

Answer

You know the right answer?

1. For the following products; what are the appropriate material selection criteria? What type of c...

Questions