subject
Engineering, 18.01.2021 01:00 jech3947

The U. S. Coast Guard requires certain equipment be carried onboard a vessel based on the vessel's length. How must an operator measure the length of their vessel? A, From the inside of the bow to the inside of the stern

B, From the outside of the bow to the outside of the stern

C, From the starboard side to the port side of the vessel

D, From the outside attachment at the bow to the outside attachment at the stern

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
You know the right answer?
The U. S. Coast Guard requires certain equipment be carried onboard a vessel based on the vessel's l...
Questions
question
History, 31.08.2019 03:20
question
Mathematics, 31.08.2019 03:20
question
History, 31.08.2019 03:20
Questions on the website: 13722367