Steam enters an adiabatic turbine steadily at 3 MPa and 400 C and leavest at 50 kPa and 100 C. if the mass flow rate is 5.64 kg/s, determine a) the power output of the turbine
b) the generated entropy for a unit time and
c) the isentropic effiency of the turbine

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.