Engineering, 13.01.2021 14:00 uc22912
Voltage input drop the full wave silicon rectifier bridge
equal 16.3 Volts,60 Hz after rectification process
continue his smoothing circuit with R=2.2k and C=
(50F),determine the Ripple Factor
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Voltage input drop the full wave silicon rectifier bridge
equal 16.3 Volts,60 Hz after rectificatio...
History, 07.12.2020 22:20
Social Studies, 07.12.2020 22:20
Mathematics, 07.12.2020 22:20
History, 07.12.2020 22:20
Mathematics, 07.12.2020 22:20
Biology, 07.12.2020 22:20