Engineering, 05.01.2021 15:40 gabrieljerron
In a venturi nozzle flow, the inlet conditions are p1 = 08 x 103 kPa gauge and d1 = 100 mm and the outlet conditions are p2 = 0 kPa gauge and d2 = 50 mm. Find the flow rate of water. Assume CD = 0.98 for the venturi coefficient.
a) (30) Neglect viscous effects (friction loss).
b) (10) Consider viscous effects.
Answers: 2
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
In a venturi nozzle flow, the inlet conditions are p1 = 08 x 103 kPa gauge and d1 = 100 mm and the o...
Mathematics, 09.09.2021 21:20
Advanced Placement (AP), 09.09.2021 21:20
Chemistry, 09.09.2021 21:20
Biology, 09.09.2021 21:20
History, 09.09.2021 21:20
Mathematics, 09.09.2021 21:20
Biology, 09.09.2021 21:20
Biology, 09.09.2021 21:20
World Languages, 09.09.2021 21:20