Engineering, 31.12.2020 18:20 ashiteru123

A rectangular classroom is to be designed so that it has a total volume of 4000 cubic feet. It must be designed to minimize heat loss. Since warm air rises the heat loss throught the ceiling is 4 times the heat loss through the floor. Th heat loss through any interior wlave is tiwce the heat loss throguh the lfoor. The loss through the outer walls is 3 times that throguh the floor the ceiling must be 10 feet high according to the local building coeds. Required:
Find the dimensions of the room that minimzie the heat loss assume the room justs out form the rest of the building.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 06.07.2019 03:10

Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c

Answers: 1

Answer

You know the right answer?

A rectangular classroom is to be designed so that it has a total volume of 4000 cubic feet. It must...

Questions