Engineering, 31.12.2020 07:40 raiapowell
Multiple Choice
Which option identifies why a geological engineer would be valuable to the project in the following scenario?
An architectural firm in Dubai has been hired to build a skyscraper that will be taller than any other building in the city. The firm is currently
consulting with a geological engineer.
Geological engineers can ensure that the stress of a building is sound.
Geological engineers can design equipment to properly evaluate the site.
Geological engineers can ensure that the materials chosen are the most cost-effective and environmentally sound
Geological engineers can help determine if the soil and structural stability in the building's location are satisfactory
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
You know the right answer?
Multiple Choice
Which option identifies why a geological engineer would be valuable to the project...
Questions
Biology, 15.04.2020 20:35
Mathematics, 15.04.2020 20:35
Mathematics, 15.04.2020 20:35
Mathematics, 15.04.2020 20:35
