Engineering, 25.12.2020 19:20 LunaSpellman
For the given Common Emitter NPN Amplifier,
the transistor made of Germanium diodes, βDC=80,VCC = 16 volts, R1= 62 KΩ, R2= 9.1 KΩ, RC= 3.9 KΩ, RE= 0.68 KΩ.
a) Name the type of biasing used in the above circuit?
b) Find VE?
c) Find VCE?
d) Find VC?
e) What is the name of the capacitors C1, C3and C2?
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
For the given Common Emitter NPN Amplifier,
the transistor made of Germanium diodes, βDC=80,VCC = 1...
Mathematics, 19.11.2020 20:40
Mathematics, 19.11.2020 20:40
Biology, 19.11.2020 20:40
Mathematics, 19.11.2020 20:40
Mathematics, 19.11.2020 20:40
Mathematics, 19.11.2020 20:40
History, 19.11.2020 20:40
Health, 19.11.2020 20:40
English, 19.11.2020 20:40
Arts, 19.11.2020 20:40