In the figure, U-section steel purlins are used in the roof beam. Purlins are simply headstock and L = 4m has openness. Purlins are allowed for evenly distributed vertical load q = 1250N / m including dead load they are exposed. Since the slope of the roof is given as tan (α) = 3/4; a) For the section in the middle of the span, calculate the normal stresses for the four corner points. b) What is the angle between the neutral axis and the x axis?

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false