A 212 kV, three phase transmission line is 40 km long. The resistance per phase is 0.15? per km and the inductance per phase is 1.3263 mH per km. Find the voltage and power at the sending end and the voltage regulation and efficiency when the line is supplying a three phase load of 312 MVA at 212 kV at i) 0.8 power factor lagging, and ii) 0.8 power factor leading.

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.

A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.