Engineering, 11.12.2020 01:00 mjstew00763
Define a separate subroutine for each of the following tasks respectively.
A) Swap the most significant bit (msb) of registered AH And the Least significant Bit (Lsb) of registered AL.
B) Check the msb of AL and LSB of BL. if they are equal, copy BL into AL. Otherwise copy AL in BL
C) set all the bits in LS Nibble and Invert All bits in the MS nibble of the word at offset address 0400H in the data segment.
D) multiply the byte at offset address 0100h with the byte at offset address 0200h. save the result at offset address 0300h in the data segment.
pls answer i took hours to write these
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
You know the right answer?
Define a separate subroutine for each of the following tasks respectively.
A) Swap the most signifi...
Questions
Mathematics, 07.11.2019 05:31
Computers and Technology, 07.11.2019 05:31
Computers and Technology, 07.11.2019 05:31
