Engineering, 06.12.2020 22:20 ajbrock1004
Raj was concentrating so much while working on his project plan that he was late for a meeting. When he went back to his office, he noticed his system had restarted and his project file was not updated. What advice would you provide Raj in this situation?
Answers: 2
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:20
Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.
Answers: 2
Raj was concentrating so much while working on his project plan that he was late for a meeting. When...
Mathematics, 26.05.2021 20:30
Physics, 26.05.2021 20:30
Mathematics, 26.05.2021 20:30
Mathematics, 26.05.2021 20:30
English, 26.05.2021 20:30
Mathematics, 26.05.2021 20:30
Mathematics, 26.05.2021 20:30
Chemistry, 26.05.2021 20:30
Mathematics, 26.05.2021 20:30