Which of the following would most likely be operated by a sequential control system? A pizza oven at a busy restaurant.

A robot that performs tasks on demand.

The master switch used to stop a train in an emergency.

School bells that mark the beginning and end of classes.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.