We take the earth and put it into a press. It ends up in the shape of a cube. We also slow down its rotation so that one side always faces the sun. Assume that the temperature throughout the cube is uniform. a) Write an equation for the effective radiating temperature of a cube-shaped planet that has a flat side that always faces the sun. (hint: Through how much surface area does the cube absorb radiation relative to the surface area through which it emits radiation?)

b) What is the effective radiating temperature of our cubed Earth? Solve your above equation.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.