Engineering, 28.11.2020 14:00 leo4687

A planar steam-water heat exchanger is on a 1.5 m2 heating surface and consists of a 5 mm thick copper plate (k=390 kcal/mhK) and an 8 mm thick nickel plate (k=70 kcal/MHK) adjacent to it. On the side of the copper plate there is steam at a temperature of 3200C, and limestone was formed due to deposits in the Steam. Due to Limestone, there is an additional thermal resistance of 0.005 m2hK/kcal against heat transfer. On the nickel side, there is water at a temperature of 400C. Heat transfer coefficients on the Steam and water side are 7000 and 600 kcal/m2hk. a) find the amount of heat passing, surface temperatures and intermediate temperatures Dec.
b) what would be the amount of heat passing if it wasn't for Limestone? In this case, what is the percentage of heat loss due to Limestone?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?

Answers: 2

Answer

Engineering, 04.07.2019 19:20

A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.

Answers: 1

Answer

Engineering, 06.07.2019 02:30

An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?

Answers: 3

Answer

You know the right answer?

A planar steam-water heat exchanger is on a 1.5 m2 heating surface and consists of a 5 mm thick copp...

Questions