Engineering, 27.11.2020 02:40 dakotacsey03
A typical run in the NASA Langley 31 -inch Mach 10 Wind Tunnel Facility isentropically expands Air from an initial pressure of p1=4.25 MPa and an initial temperature of T1=950 K. Assume this gas is calorically perfect and it is expanded into the test section where the pressure is measured to be P2 = 100 Pa. From this:
(a) determine the test section temperature, T2.
(b) determine the test section density, P2.
(c) if the process was NOT isentropic, would the temperature be higher or lower than what you computed in part (a)? Justify your answer.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
A typical run in the NASA Langley 31 -inch Mach 10 Wind Tunnel Facility isentropically expands Air f...
Questions
