Engineering, 25.11.2020 14:20 alexisgilford

The leading edge of a supersonic wing is wedge shaped, with a total wedge angle of 10°. The wing flies at an angle of attack of 3° at an altitude of 10 km in standard atmosphere (k = 1.4 and R = 287 J/kg×K). Assume that the wing is traveling at Mach 2.5 and the total surface area is 1 m2 on each side, i. e., the unit length and the unit width. Required:
a. Schematically draw the wing, including the angle of attack, the oblique shock wave angles, and the upstream properties of Px and Tx.
b. Calculate the pressure in the region above the wing in kPa.
c. Calculate the pressure in the region below the wing in kPa.
d. Calculate the total lift force created by the wing in kN
e. Calculate the total drag force created by the wing in kN.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

Answer

You know the right answer?

The leading edge of a supersonic wing is wedge shaped, with a total wedge angle of 10°. The wing fli...

Questions