Engineering, 23.11.2020 08:50 shadenShaden4528
Testing should be recorded for each piece of Automotive lifting equipment in accordance with local legislation or shop procedures and the equipment should be tagged with its inspection date and
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Testing should be recorded for each piece of Automotive lifting equipment in accordance with local l...
Mathematics, 04.12.2021 02:20
English, 04.12.2021 02:20
History, 04.12.2021 02:30
Biology, 04.12.2021 02:30
Mathematics, 04.12.2021 02:30
Physics, 04.12.2021 02:30
Biology, 04.12.2021 02:30
Mathematics, 04.12.2021 02:30
Mathematics, 04.12.2021 02:30
Mathematics, 04.12.2021 02:30