Engineering, 16.11.2020 17:20 Skylynn11
In flowing from section (1) to section (2) along an open channel, the water depth decreases by a factor of two and the Froude number changes from a subcritical value of 0.4 to a supercritical value of 2.5. Determine the channel width at (2) if it is 13 ft wide at (1).
Answers: 3
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
In flowing from section (1) to section (2) along an open channel, the water depth decreases by a fac...
Mathematics, 01.07.2019 04:50
Mathematics, 01.07.2019 04:50
Chemistry, 01.07.2019 04:50
English, 01.07.2019 04:50
Mathematics, 01.07.2019 04:50
Mathematics, 01.07.2019 04:50
Chemistry, 01.07.2019 04:50
Mathematics, 01.07.2019 04:50
Mathematics, 01.07.2019 04:50
Mathematics, 01.07.2019 05:00
Mathematics, 01.07.2019 05:00
Mathematics, 01.07.2019 05:00
Mathematics, 01.07.2019 05:00