subject
Engineering, 12.11.2020 19:10 jfefeferf

Write the method is PreviousIndex, which will receive two parameters. The first one is an array of integer numbers, and the other one is an integer value as an index. The method should return a true boolean value only if the number at the index received as the second parameter appears in a previous element than the index received as second parameter). It should return false otherwise. As an example, if the array received was the following: int[] numbers - (3, 4, 5, 6, 7, 8, 4, 6, 2, 7, 8, 9, 1, 2, 2, , 7, 7); With an integer 6 as the index. It should return true given that the number 4 is also at index 1. However, if the number received as index was 1 it should return false, since the value 4 does not appear at any Index previous than 1. In other words, the index O in that array is not the same as the one in the index 1. Note that you only need to code the method, not all the program.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Air flows over a heated plate Ă t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
question
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
question
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
question
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
You know the right answer?
Write the method is PreviousIndex, which will receive two parameters. The first one is an array of i...
Questions
question
Mathematics, 22.04.2021 04:10
question
Mathematics, 22.04.2021 04:10
Questions on the website: 13722367