11) What is the period of a 50 kHz sine wave?
A) 5.104
B) 50 us
C) 5μ...
Engineering, 12.11.2020 01:00 trellizzz
11) What is the period of a 50 kHz sine wave?
A) 5.104
B) 50 us
C) 5μ
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
Questions
Mathematics, 21.08.2020 14:01
Mathematics, 21.08.2020 14:01
Advanced Placement (AP), 21.08.2020 14:01
Spanish, 21.08.2020 14:01
Physics, 21.08.2020 14:01
Geography, 21.08.2020 14:01
Health, 21.08.2020 14:01
History, 21.08.2020 14:01
Physics, 21.08.2020 14:01
History, 21.08.2020 14:01
