Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
The specifications state that all work shall be done...
Spanish, 02.12.2020 01:50
Mathematics, 02.12.2020 01:50
Arts, 02.12.2020 02:00
Mathematics, 02.12.2020 02:00
World Languages, 02.12.2020 02:00
Mathematics, 02.12.2020 02:00
Mathematics, 02.12.2020 02:00
Physics, 02.12.2020 02:00
History, 02.12.2020 02:00