Engineering, 09.11.2020 16:20 johnthevarietyboy200
A differential amplifier is to have a voltage gain of 100. What will be the feedback resistance required if the input resistances are both 1 kΩ?
Answers: 2
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
A differential amplifier is to have a voltage gain of 100. What will be the feedback resistance requ...
History, 06.05.2020 07:34
English, 06.05.2020 07:34
Social Studies, 06.05.2020 07:34
Mathematics, 06.05.2020 07:34
Arts, 06.05.2020 07:34
English, 06.05.2020 07:34
World Languages, 06.05.2020 07:34
Mathematics, 06.05.2020 07:34
Social Studies, 06.05.2020 07:34
Mathematics, 06.05.2020 07:34
English, 06.05.2020 07:34
Mathematics, 06.05.2020 07:34