Engineering, 04.11.2020 01:00 kkruvc
Explain what type of diagram you can create using a compass, a T-square, a triangle, and a protractor.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Explain what type of diagram you can create using a compass, a T-square, a triangle, and a protracto...
Questions
Mathematics, 18.03.2021 20:20
Mathematics, 18.03.2021 20:20
Mathematics, 18.03.2021 20:20
Mathematics, 18.03.2021 20:20
Mathematics, 18.03.2021 20:20
Physics, 18.03.2021 20:20
Mathematics, 18.03.2021 20:20
Biology, 18.03.2021 20:20
Mathematics, 18.03.2021 20:20
Computers and Technology, 18.03.2021 20:20
