In the CS stage of the figure below, we
have Rs = 200 , Ces = 250 fF, CGD =
80 fF, Coe = 100 f...
Engineering, 02.11.2020 19:30 sam710
In the CS stage of the figure below, we
have Rs = 200 , Ces = 250 fF, CGD =
80 fF, Coe = 100 ff, g. m= 150 ohm-1, lamda=o, and R = 2 ko.
Using the dominant pole
approximation, the 2 poles of the
circuit are found to be:
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
You know the right answer?
Questions
Mathematics, 17.02.2020 22:44
Mathematics, 17.02.2020 22:45
English, 17.02.2020 22:45
Mathematics, 17.02.2020 22:45
