Engineering, 26.10.2020 21:30 yesmi

1333 The purpose of a relay is to switch a large main current, using a small control current.
A small switch can handle the control current without burning out. The relay contacts
switch the current to the load and are large enough to handle this.
Om
OFF
20M
22
2M
30
A standard relay has four electrical terminals.
These are: (1) main current input, (2) main current output, (3) control current input,
and (4) control current output.
- 200K
87
20K
For example, relays can be used to switch current to the starter solenoid, horn, and
headlamps.
200
1)
16.COM
VΩ
Measure the control current. This is the current that flows through the coil.
mA

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

Answer

You know the right answer?

1333 The purpose of a relay is to switch a large main current, using a small control current.
...

Questions