Engineering, 26.10.2020 17:20 struckedblazing
A criterion is required for selecting a material with the lowest cost in a strength-limited design for a cylindrical tie rod. Write the objective statement. Derive the criterion and identify the material index. The length of the tie rod, L, is fixed.
Answers: 3
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
A criterion is required for selecting a material with the lowest cost in a strength-limited design f...
English, 09.12.2020 05:40
Arts, 09.12.2020 05:40
Biology, 09.12.2020 05:40
Mathematics, 09.12.2020 05:40
Mathematics, 09.12.2020 05:40
Biology, 09.12.2020 05:40
Mathematics, 09.12.2020 05:40
Biology, 09.12.2020 05:40
Mathematics, 09.12.2020 05:40