Engineering, 22.10.2020 21:01 Jamuel3761
Which primer coat improves adhesion of the topcoat and prevents bleed through of old painted surfaces through of old painted surfaces that have been sanded
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
Which primer coat improves adhesion of the topcoat and prevents bleed through of old painted surface...
Questions
Biology, 06.10.2019 06:00
Biology, 06.10.2019 06:00
English, 06.10.2019 06:00
History, 06.10.2019 06:00
Computers and Technology, 06.10.2019 06:00
Mathematics, 06.10.2019 06:00
Social Studies, 06.10.2019 06:00
History, 06.10.2019 06:00
Mathematics, 06.10.2019 06:00
