Engineering, 21.10.2020 17:01 jstamey757

g Calculate the jet Reynolds number based on the jet exit velocity (the velocity of the jet as it leaves the tube) and the diameter of the tube. Note: Find the jet exit velocity from the air flow rate measured by the rotameter, do not try to measure it with the Pitot tube. Note: Make sure to report velocity in m/s. 9. Plot the jet centerline velocity as a function of the nondimensional position downstream of the exit. For a jet flowing into still surroundings of the same substance, the centerline concentration will decay as 1/x. Fit your data to: Velocity

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

You know the right answer?

g Calculate the jet Reynolds number based on the jet exit velocity (the velocity of the jet as it le...