Which of the following is an example of a composite material?
A. cellulose fiber
B. tre...
Engineering, 20.10.2020 04:01 giana33186
Which of the following is an example of a composite material?
A. cellulose fiber
B. treated wood
C. epoxy resin
D. tempered steel
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
English, 25.01.2022 17:00
Mathematics, 25.01.2022 17:00
English, 25.01.2022 17:00
Mathematics, 25.01.2022 17:10
Mathematics, 25.01.2022 17:10
Geography, 25.01.2022 17:10
Mathematics, 25.01.2022 17:10
Mathematics, 25.01.2022 17:10
Mathematics, 25.01.2022 17:10