Engineering, 15.10.2020 17:01 raymondleggett44

Edro, Lena, Harriet, and Yermin each plot a point to approximate StartRoot 0.50 EndRoot. Pedro A number line going from 0 to 0.9 in increments of 0.1. A point is between 0.2 and 0.3.

Lena A number line going from 0 to 0.9 in increments of 0.1. A point is between 0.4 and 0.5.

Harriet A number line going from 0 to 0.9 in increments of 0.1. A point is at 0.5.

Yermin A number line going from 0 to 0.9 in increments of 0.1. A point is just to the right of 0.7.

Whose point is the best approximation of StartRoot 0.50 EndRoot?
Pedro
Lena
Harriet
Yermin
Mark this and ret

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

You know the right answer?

Edro, Lena, Harriet, and Yermin each plot a point to approximate StartRoot 0.50 EndRoot. Pedro A nu...

Questions