Engineering, 15.10.2020 08:01 tayshhah3945
Molten metal is poured into the downsprue at a constant flow rate during the time it takes to fill the mold. At the end of pouring the sprue is filled and there is negligible metal in the pouring cup. The downsprue is 6.0 in long, its cross sectional area at the top = 0.8 in2, and at the base = 0.6 in2. The cross sectional area of the runner leading from the sprue also = 0.6 in^2, and it is 8.0 in long before leading into the mold cavity, whose volume = 65 in^3. The volume of the riser located along the runner near the mold cavity = 25 in^3. It takes a total of 3.0 sec to fill the entire mold (including cavity, riser, runner, and sprue. This is more than the theoretical time required, indicating a loss of velocity due to friction in the sprue and runner. Determine:
a. The theoretical velocity and flow rate at the base of the downsprue assuming no friction and zero velocity in the pouring cup.
b. Total volume of the mold, including downsprue, runner, and riser.
c. Actual velocity and flow rate at the base of the sprue
d. Loss of head in the gating system due to friction.
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Molten metal is poured into the downsprue at a constant flow rate during the time it takes to fill t...
English, 14.04.2020 21:50
Mathematics, 14.04.2020 21:50
Biology, 14.04.2020 21:50
Mathematics, 14.04.2020 21:50
Mathematics, 14.04.2020 21:50
Biology, 14.04.2020 21:50