I will give any won who anserw the next question i post 200 points
just text me back...
Engineering, 12.10.2020 20:01 oliup567
I will give any won who anserw the next question i post 200 points
just text me back
Answers: 2
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Mathematics, 03.11.2020 04:50
Mathematics, 03.11.2020 04:50
English, 03.11.2020 04:50
Mathematics, 03.11.2020 04:50
English, 03.11.2020 04:50
Mathematics, 03.11.2020 04:50
Mathematics, 03.11.2020 04:50
Arts, 03.11.2020 04:50
Biology, 03.11.2020 04:50
Advanced Placement (AP), 03.11.2020 04:50
Chemistry, 03.11.2020 04:50
Mathematics, 03.11.2020 04:50
Mathematics, 03.11.2020 04:50