In the commercial production of sugar (sucrose), the product crystals are washed and centrifuged to partial dryness. The crystals are then sent through a rotary dryer where they are contacted with a hot stream of air that reduces the moisture content from 1:0 wt% to 0:1 wt%. The ratio of wet sugar to inlet air fed to the dryer is 3.3 kg wet sugar/kg inlet air. The inlet air contains 1.5 mole% water. (a) Draw and label the flowchart and do the degree-of-freedom analysis

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?