Engineering, 25.09.2020 03:01 CalCDanG

Two wires of the same length and cross sectional area have finite but different E-field magnitudes inside them when the same current is flowing in each. The E-field magnitude in wire 1 is less than the field magnitude in wire 2. Select all of the following statements that are true based on this situation: The voltage drop in wire 1 is the same as the voltage drop in wire 2
The conductivity of wire 1 is less than the conductivity in wire 2
There is not enough information given in the problem to definitely determine the answer to the other 9 statements.
The power dissipation in wire 1 is more than the power dissipation in wire 2
The conductivity of wire 1 is more than the conductivity in wire 2
The conductivity of wire 1 is the same as the conductivity in wire 2
The power dissipation in wire 1 is less than the power dissipation in wire 2
The power dissipation in wire 1 is the same as the power dissipation in wire 2
The voltage drop in wire 1 is greater than the voltage drop in wire 2
The voltage drop in wire 1 is less than the voltage drop in wire 2

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

Two wires of the same length and cross sectional area have finite but different E-field magnitudes i...

Questions