A company was experiencing a chronic weld-defect problem with a water-outlet-tube assembly. Each assembly manufactured is leak tested in a water tank. Data were collected on a gap between the flange and the pipe for 6 bad assemblies that leaked and 6 good assemblies that passed the leak test. Leaker 0.290 0.104 0.207 0.145 0.104 0.124
A) Calculate the sample mean.
B) Calculate the sample standard deviation.
S2 = n infinity xi2 - (infinity xi2)/n(n-1)

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.