Engineering, 24.09.2020 01:01 tipbri6380
A steady‐flow gas furnace supplies hot air at a rate of 850 cfm and conditions of 120F and 1.00 atm. The air splits into two branches: a 10" diameter duct and a 12" diameter duct. The velocity in the 12" diameter duct is 800 ft/min.
Determine:
(a) The volumetric flow in the 12"‐dia. duct.
(b) The velocity in the 10"‐dia. duct.
(c) The volumetric flow rate into the furnace if the air enters at 68F and 1.00 atm.
(d) The mass flow rate of air entering the furnace.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
You know the right answer?
A steady‐flow gas furnace supplies hot air at a rate of 850 cfm and conditions of 120F and 1.00 atm....
Questions
History, 26.07.2019 17:00
History, 26.07.2019 17:00
Social Studies, 26.07.2019 17:00
Social Studies, 26.07.2019 17:00
Biology, 26.07.2019 17:00
Mathematics, 26.07.2019 17:00
Biology, 26.07.2019 17:00
Biology, 26.07.2019 17:00
Biology, 26.07.2019 17:00
Biology, 26.07.2019 17:00
