At a high school science fair, Connor won first place for his replica of the Golden Gate Bridge. Connor liked the project so much, he now wants to design bridges as a career. Which will best position Connor do that? earning a bachelor's degree in Civil Engineering from a four-year university, completing an internship, and seeking a job at a private firm O earning a doctoral degree in Civil Engineering and seeking a job in the public works department of a state or federal government completing an internship with a state or federal government before earning an associate degree in Civil Engineering from a technical school working at an entry-level job at a private engineering firm before earning a degree in Civil Engineering from a four- year university

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

On a average work day more than work place firs are reorted

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?