The biogas capture process described in part (a) has been so successful that an additional digester and compressor are going to be purchased. It has been proposed that the new compressor be one that can operate in continuous mode, compressing biogas isothermally at 300 K from 10 atm to 50 atm. Assuming that this compressor operates at 90% efficiency, what is its expected energy demand

1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction