For an ASTM 25 cast iron,
a) find the factors of safety using the BCM and MM theories,
b) pl...
Engineering, 21.09.2020 14:01 kevinvalencia01
For an ASTM 25 cast iron,
a) find the factors of safety using the BCM and MM theories,
b) plot the failure diagrams in the GA, GB plane to scale and locate the coordinates of the stress state, and
c) estimate the factors of safety from the two theories by graphical measurements along the load line.
Use the appropriate parameters for the specific problem from the table below:
Problem Number 0x(kpsi) y(kpsi) Txy (kpsi)
5-21 15 10 0
5-22 15 -50 0
5-23 15 0 -10
5-24 -10 -25 -10
5-25 -35 -13 -10
Answers: 3
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
History, 13.02.2020 05:53
Mathematics, 13.02.2020 05:53
Biology, 13.02.2020 05:53
Mathematics, 13.02.2020 05:53
Social Studies, 13.02.2020 05:53
History, 13.02.2020 05:53
Mathematics, 13.02.2020 05:53
English, 13.02.2020 05:53