Tech A says that a technician can specialize in different areas based on his or her interest and ability. Tech B says that most specialty shops, such as transmission shops, primarily work on only one manufacturer's vehicles. Who is correct?

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.