Engineering, 05.09.2020 19:01 jayjay5246

1. In a manufacturing system, how do input and process affect output? 2. Name two advantages of reducing byproducts.
3. Name the three types of engineers most critical to the manufacturing industry.
4. How are the fields of science and engineering related?
5. Why were labor unions created?
Critical Thinking Questions
6. What are the advantages of automation in manufacturing? What disadvantages might there be?
7. If you were to enter the field of engineering, what type of engineer would you like to become?
8. Explain using what you’ve learned about the different kinds of engineers in this unit.
9. Use an example to illustrate the following quote: “Scientists study the world as it is; engineers create the world that has never been.”
10. How do you think the manufacturing industry will evolve in the next ten years? Explain.
11. How would the manufacturing industry be different had interchangeable parts not been invented?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

Answer

Engineering, 04.07.2019 19:10

An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?

Answers: 2

Answer

You know the right answer?

1. In a manufacturing system, how do input and process affect output? 2. Name two advantages of red...

Questions