Engineering, 13.08.2020 05:01 charity56
A gas mixture is found to contain two diatomic A and B species (A2 and B2), the partial pressures of both of which are 0.1013 MPa (1 atm). This mixture is to be enriched in the partial pressure of the A species by passing both gases through a thin sheet of some metal at an elevated temperature. The resulting enriched mixture is to have a partial pressure of 0.051 MPa (0.5 atm) for gas A and 0.0203 MPa (0.2 atm) for gas B. The concentrations of A and B (CA and CB, in mol/m3 ) are functions of gas partial pressures (pA2 and pB2, in MPa) and absolute temperature according to the following expressions:
CA =1.5Γ10^3 pA 2 exp(β RT20,000J/mol)
CB =2.0Γ10^3 pB 2 exp(β RT27,000J/mol)
Furthermore, the diffusion coefficients for the diffusion of these gases in the metal are functions of the absolute temperature, as follows:
DA(m2/s)=5.0Γ10β7exp(β13,000J/molRT )
DB(m2/s)=3.0Γ10β6exp(β21,000J/molRT )
Is it possible to purify gas A in this manner? If so, specify a temperature at which the process may be carried out, and also the thickness of metal sheet that would be required. If this procedure is not possible, then state the reason(s) why.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 19:10
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
Engineering, 04.07.2019 19:20
The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal
Answers: 3
A gas mixture is found to contain two diatomic A and B species (A2 and B2), the partial pressures of...
Social Studies, 22.08.2019 23:30
Health, 22.08.2019 23:30
Chemistry, 22.08.2019 23:30
English, 22.08.2019 23:30
Mathematics, 22.08.2019 23:30
Mathematics, 22.08.2019 23:30
Business, 22.08.2019 23:30
Mathematics, 22.08.2019 23:30
English, 22.08.2019 23:30
History, 22.08.2019 23:30