Engineering, 12.08.2020 04:01 bubster5820
10.56 A fluid with y = 10 m/s and p 800 kg/mm' lows
through the 8 cm galvanized iron pipe. Estimate the flow rate
for the conditions shown in the figure. € = 0.125mm
Answers: 1
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
10.56 A fluid with y = 10 m/s and p 800 kg/mm' lows
through the 8 cm galvanized iron pipe. Estimate...
Mathematics, 29.06.2019 00:30
Mathematics, 29.06.2019 00:30
Social Studies, 29.06.2019 00:30
Social Studies, 29.06.2019 00:30
World Languages, 29.06.2019 00:30
Biology, 29.06.2019 00:30
History, 29.06.2019 00:30