Engineering, 01.08.2020 16:01 shaylawaldo11
A hollow shaft of diameter ratio 3/8 (internal dia to outer dia) is to transmit 375 kW power at 100 rpm. The maximum torque being 20% greater than the mean torque. The shear stress is not to exceed 60 N/mm2 and twist in a length of 4m not to exceed 2o. Calculate its external and internal diameters which would satisfy both the above conditions. (G= 0.85 X 105 N/mm2)
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
A hollow shaft of diameter ratio 3/8 (internal dia to outer dia) is to transmit 375 kW power at 100...
Questions
English, 18.04.2021 14:00
Mathematics, 18.04.2021 14:00
Mathematics, 18.04.2021 14:00
Physics, 18.04.2021 14:00
Mathematics, 18.04.2021 14:00
Chemistry, 18.04.2021 14:00
English, 18.04.2021 14:00
Mathematics, 18.04.2021 14:00
Mathematics, 18.04.2021 14:00
Computers and Technology, 18.04.2021 14:00
Mathematics, 18.04.2021 14:00
