The principal strains are ε p 1 = 715 με , ε p 2 = 570 με , for a point in a body subjected to plane strain. Assume θ p = 33.86 ∘ . Construct Mohr’s circle and use it to (a) determine the strains ε x , ε y , and γ x y . (Assume ε x > ε y ) (b) determine the maximum in-plane shear strain and the absolute maximum shear strain. (c) draw a sketch showing the angle θ p , the principal strain deformations, and the maximum in-plane shear strain distortions. On a piece of paper, construct Mohr’s circle. Enter the strains corresponding to the center C and radius R of Mohr’s circle.

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg. a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?