Engineering, 29.07.2020 02:01 Maelynne8515

Explain the operation of the alarm system and strobe lighting system: By determining the resistance of the resistor in the alarm circuit and explain the
functionality of the resistor in the circuit;
(ii) By providing all circuit theory explanations and calculations to show that the voltage in
the alarm system can be reduced to 5V since the system needs to operate with a current
between 0.4mA to 0.6mA;
(iii) By providing all charge theory explanations and calculations to show the current flowing
in the strobe lighting system.
Without calculating the values oynlain how the current

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:10

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

Answer

Engineering, 05.07.2019 19:10

Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?

Answers: 1

Answer

Engineering, 06.07.2019 02:30

A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush

Answers: 3

Answer

You know the right answer?

Explain the operation of the alarm system and strobe lighting system: By determining the resistance...

Questions